Skip to content

01 / 04 · Profile

Profile 01 Channel Letter

Profile 01 channel letters are fabricated from aluminium with the returns welded to the face. The material thickness depends on the stroke height of the letter. Standard depth is 50 mm; larger depths are available on request. After chemical cleaning and sanding, the exterior is powder-coated in any RAL colour. The back comes in two versions, 10 mm forex or 2 mm aluminium, and is fixed with screws. Unlit: no LED lighting.

Colour
+ any RAL on request

02 / 04 · Construction

Taken apart: how it is built

50 mm deep as standard: 2 mm aluminium face, welded aluminium returns, 10 mm forex back.

03 / 04 · Any RAL colour

Unlit, in your colour

Without light it is all form and finish: the box is powder-coated in any RAL colour, or stays brushed aluminium.

04 / 04 · On the façade

Built in our own factory

Milled, welded, coated and lit under one roof, delivered tested. You get a quote on your drawing or logo.

Colour
+ any RAL on request
Profile 01 Channel Letter
Real product

Channel letters

Profile 01 Channel Letter

Profile 01 channel letters are fabricated from aluminium with the returns welded to the face. The material thickness depends on the stroke height of the letter. Standard depth is 50 mm; larger depths are available on request. After chemical cleaning and sanding, the exterior is powder-coated in any RAL colour. The back comes in two versions, 10 mm forex or 2 mm aluminium, and is fixed with screws. Unlit: no LED lighting.

The back plate sits inside the box. As with the face of profile 6, a strip is glued round the plate and the screws go through the returns into that strip. Forex is always white. An aluminium back plate is powder-coated in the same RAL colour as the box, or in another colour on request.

Fixing with stainless steel screws: Ø3.5 mm up to 600 mm letter height, Ø4.2 mm above. A side up to 300 mm gets one screw in the middle; longer sides get screws at most 0.4 × the letter height apart (between 250 and 400 mm).

Delivered within 4 to 5 weeks, unbranded. In the profile configurator you can view the profile in 3D with your own text, colour and back plate.

De gebruikte materiaaldikte is afhankelijk van de stokhoogte van de letter.
Standaarddiepte is 50 mm; grotere dieptes zijn op aanvraag leverbaar.

Cross-section

Drawn to scale

Colour options · RAL

  • RAL 9006
  • RAL 9005
  • RAL 5002
  • RAL 3030
  • RAL 5015
  • RAL 5017
  • RAL 5022
  • RAL 8015
  • RAL 6005
  • RAL 1023
  • RAL 1028
  • RAL 7040
  • RAL 7035
  • RAL 6018
  • RAL 6024
  • RAL 1015
  • RAL 2004
  • RAL 4010
  • RAL 4008
  • RAL 7015
  • RAL 3001
  • RAL 3002
  • RAL 3020